ÿÌ,[Setupbox &'ÿHardware Setup8Ä°d B#ÿÿÿÿ$Form3586Ä7°8d ÿ!Command1ÿOK$ TtÿSLabel4ÿ6 4) The CLK 2 OUT jumper should be installed.¼”ÀÿPLabel2ÿ3 3) The IRQ jumper should be set to IRQ 5.ÌÀÿS€ Label1ÿ1 2) The DIFF/SE jumper should be set to SE. xÜ, üÿ@€Label1ÿThe output is scaled in volts.x”¤ üÿJ€Label1ÿ(The program expects the following setup:xü< üÿL€Label1ÿ* 1) The base address set to 300 hex.xì, üÿO€Label1ÿ-of the AD8-16, using timer-driven interrupts.x¤ üÿZ€Label1ÿ8This program will display the input from the 16 channelsx´„üÿBü__   ÐQÐQ‚Zu¦›l’ÂCommand1_ClickForm3 Form_Load² Label1_ClickIndexConvertSetupbox Label2_Click ; ÿÿÿÿÿÿÿÿCommand1_Click4 XZ ¦9 ÿÿÿÿÿÿÿÿý