/*SETUP_DIALOG DIALOG 18, 18, 142, 92
STYLE DS_MODALFRAME | WS_CAPTION | WS_SYSMENU
CAPTION "AD12-8 Sample Two"
BEGIN
	DEFPUSHBUTTON "OK", IDOK, 60, 58, 24, 14, WS_GROUP
END
*/
SAMPLE2_MENU MENU
BEGIN
	POPUP "Setup"
	BEGIN
		MENUITEM "Card Setup", 101
	END

	POPUP "Convert"
	BEGIN
		MENUITEM "A/D Start", 201
		MENUITEM "A/D Stop", 202
	END

	POPUP "About"
	BEGIN
		MENUITEM "About Sample 2", 301
	END

END

ABOUTBOX DIALOG 22, 17, 144, 75
STYLE DS_MODALFRAME | WS_CAPTION | WS_SYSMENU
CAPTION "About Sample 2"
BEGIN
	CTEXT "AD8-16 Sample 2 Program", -1, 0,5,144,8, WS_CHILD | WS_VISIBLE | WS_GROUP
	CTEXT "Version 1.0", -1, 0,34,144,8
	CTEXT "ACCES I/O Products Inc.", -1, 0, 15, 145, 8
	CTEXT "Tech Support: Call 619-693-9005", -1, -1, 25, 145, 8
	CTEXT "Written by: James Belcher", -1, -1, 46, 145, 8
	CONTROL "OK", IDOK, "BUTTON", WS_GROUP, 55, 60, 32, 14
END


SETUP_DIALOG DIALOG 23, 31, 197, 104
STYLE DS_SYSMODAL | WS_CAPTION | WS_SYSMENU
CAPTION "AD8-16 Setup"
BEGIN
	LTEXT "This program will display the input from the 16 channels", -1, 5, 15, 186, 9
	LTEXT "of the AD8-16, using timer-driven interrrupts.  The output is ", -1, 5, 25, 187, 8, WS_CHILD | WS_VISIBLE | WS_GROUP
	LTEXT "2) The SE/DIFF jumper should be set to SE.", -1, 16, 55, 146, 8, WS_CHILD | WS_VISIBLE | WS_GROUP
	LTEXT "1)  The base address set to 300 hex.", -1, 16, 46, 120, 8
	CONTROL "OK", IDOK, "BUTTON", WS_GROUP, 88, 85, 24, 14
	LTEXT "3)  The IRQ jumper should be at IRQ5.", -1, 16, 64, 176, 8, WS_CHILD | WS_VISIBLE | WS_GROUP
	LTEXT "4) Counter 2's OUT jumper should be installed.", -1, 16, 73, 176, 8, WS_CHILD | WS_VISIBLE | WS_GROUP
	LTEXT "in Volts.  The following setup should be used:", -1, 5, 34, 187, 8, WS_CHILD | WS_VISIBLE | WS_GROUP
END